13-10
User Guide for Cisco Unified Operations Manager
OL-19470-01
Chapter 13 Generating Audio Phone and Video Phone Reports
Using Audio Phones and Applications Reports
Generating the All ATA Devices Report
The All ATA Devices report lists all Advanced Technology Attachment (ATA) devices registered with
the Cisco Unified Communications Manager that Operations Manager monitors.
Step 1 Select Reports > Audio Phones and Applications > All ATA Devices. The All ATA Devices report
appears in a new window, displaying information for all ATA devices only. For more information, see
Generating IP Phone Inventory Reports, page 13-3.
Generating the Cisco 1040 Sensors Report
The Cisco 1040 Sensors report lists all Cisco 1040 Sensors connected to the switches that Operations
Manager monitors.
Step 1 Select Reports > Audio Phones and Applications > Cisco 1040 Sensors. The Cisco 1040 Sensors
report appears in a new window, displaying information for Cisco 1040 Sensors only.For more
information, see Generating IP Phone Inventory Reports, page 13-3.
Table 13-2 All CTI Applications Report
Column Description
Extension Extension of the CTI Application (CTI Port/CTI Route Point).
Application
Information
The defined name of the CTI application, as reported by the Cisco Unified
Communications Manager. If the application is not registered in CTI, this
field displays Not supported.
Registered Whether or not the CTI Application is registered with the Cisco Unified
Communications Manager: Yes or No.
IP Address
• IP address of the CTI application (in case the application is a CTI port)
• IP address of the Cisco Unified Communications Manager (in case the
application is a CTI Route Point)
CCM Address Cisco Unified Communications Manager address.
Device Type Type of the device.
Device Description Description of the device.
Table 13-3 All ATA Devices Report
Columns and Buttons Description/Action
Device Name Name of the ATA device
Device Type ATA device type
CCM Name Name of the Cisco Unified Communications Manager
