1-3
Cisco ME 6500 Series Ethernet Switch Installation Guide
OL-8900-03
Chapter 1 Product Overview
Cisco ME 6524 Ethernet Switch (ME-C6524GS-8S)
Power supplies • Supports one or two power supplies. The following power supplies are
supported:
–
PWR-400W-DC (400 W DC-input power supply)
–
PWR-400W-AC (400 W AC-input power supply)
Note The 400 W AC-input power supply requires single-phase source AC.
Source AC can be out of phase between multiple power supplies
because all AC power supply inputs are isolated.
Note Both the AC-input power supply and the DC-input power supply
have status LEDs. Refer to Appendix
A for descriptions of the LEDs
and their meanings.
Note The ME6524 switches support a combination of AC-input and
DC-input power supplies in the same chassis.
Pluggable transceivers supported • The chassis supports SFP transceivers.
• The 8 uplink ports support the following SFP transceiver types:
–
GLC-T—1000BASE-T
–
GLC-SX-MM—1000BASE-SX
–
GLC-LH-SM—1000BASE-LX/LH
–
GLC-ZX-SM—1000BASE-ZX
–
GLC-BX-D—1000BASE-BX10-D
–
GLC-BX-U—1000BASE-BX10-U
–
GLC-FE-100BX-D—100BASE-BX10-D
–
GLC-FE-100BX-U—100BASE-BX10-U
–
CWDM-SFP-xxxx—CWDM SFP transceivers
–
DWDM-SFP-xxxx—DWDM SFP transceivers
• The 24 downlink ports support the following SFP transceiver types:
–
GLC-T—1000BASE-T
–
GLC-SX-MM—1000BASE-SX
–
GLC-LH-SM—1000BASE-LX/LH
–
GLC-ZX-SM—1000BASE-ZX
–
GLC-BX-D—1000BASE-BX10-D
–
GLC-BX-U—1000BASE-BX10-U
–
GLC-FE-100BX-D—100BASE-BX10-D
–
GLC-FE-100BX-U—100BASE-BX10-U
Note CWDM and DWDM SFP transceivers are not supported in the
downlink ports.
Note Refer to Appendix B for SFP transceiver cabling distances and
additional information.
Table 1-1 Cisco ME 6524 Ethernet Switch (ME-C6524GS-8S) Features (continued)
Feature Description
