3-35
Cisco ASR 9000 Series Aggregation Services Router Getting Started Guide
OL-17502-01
Chapter 3 Configuring General Router Features
Configuring the Management Ethernet Interface
Step 6
router static address-family ipv4 unicast
0.0.0.0/0
default-gateway
Example:
RP/0/RSP0/CPU0:router(config-static)#
address-family ipv4 unicast
Establishes a static route.
Step 7
commit
Example:
RP/0/RSP0/CPU0:RO-C(config)# commit
Commits the target configuration to the running
configuration.
Step 8
end
Example:
Saves configuration changes.
• When you issue the end command, the system
prompts you to commit changes:
Uncommitted changes found, commit them before
exiting(yes/no/cancel)?
[cancel]:
–
Entering yes saves configuration changes to the
running configuration file, exits the configuration
session, and returns the router to EXEC mode.
–
Entering no exits the configuration session and
returns the router to EXEC mode without
committing the configuration changes.
–
Entering cancel leaves the router in the current
configuration session without exiting or
committing the configuration changes.
Step 9
show interfaces MgmtEthrack/slot/CPU0/port
Example:
RP/0/RSP0/CPU0:router(config)# interface MgmtEth
0/RP0/CPU0/0
Displays statistics for the management interfaces
configured on the router.
Command or Action Purpose
