A SERVICE OF

logo

Cisco Catalyst Blade Switch 3030 Getting Started Guide
Installation Warning Statements
1-20
Cisco Catalyst Blade Switch 3030 Getting Started Guide
78-17052-01
Figure 7 Connecting to 10/100/1000 Ports
Use either a crossover or a straight-through cable for connections to a copper
10/100/1000 or 1000BASE-T SFP module port on the switch, regardless of the
type of device on the other end of the connection.
Step 2 Insert the other cable end into an RJ-45 connector on the other device.
Install the SFP Modules and Connect to the Ports
Follow these steps:
Step 1 Grasp the SFP module on the sides, and insert it into the switch slot until you feel
the connector snap into place (see Figure 8).
Figure 8 Installing an SFP Module
143475
11x
12x
13x
14x
15x
16x
Console
11x
12x
13x
14x
15x
16x
CON
143476
11x
12x
13x
14x
15x
16x
Console
11x
12x
13x
14x
15x
16x
I