A SERVICE OF

logo

Open as PDF
next previous
Black plate (77,1)
Chevrolet Traverse Owner Manual - 2011
Vehicle Care 10-77
4. Pull the cable (A) through the
door striker (E), the center of the
wheel (D), and the plastic spare
tire heat shield (C), as shown.
5. Hook the cable onto the outside
portion of the liftgate hinges (B).
6. Hook the other end of the cable
onto the outside portion of the
liftgate hinge on the other side of
the vehicle.
7. Pull on the cable to make sure it
is secure.
8. Make sure the metal tube is
centered at the striker. Push the
tube toward the front of the
vehicle.
9. Close the liftgate and make sure
it is latched properly.