2. 4 External Storage
2. 4. 1 Using USB memory device
Insert the memory device into the USB port.
The system automatically recognizes the
device.
2. 4. 2 Connecting CD-R/RW & HDD via USB
Connect and power each USB device before
powering the DVR.
2. 4. 3 Connecting IEEE1394 (FireWire)
devices
Connect and power each device before
powering the DVR.
2. 5 Connecting to LAN or
Internet
2. 5. 1 Making physical connection
Connect the LAN port of the DVR to an
available 10/100 Base-T port with a straight
ethernet cable (not supplied). The link
indicator LED will be lit.
2. 5. 2 Automatic network configuration
The DVR can automatically obtain and
configure the network interface via DHCP.
Refer to page 19.
2. 5. 3 Manually configure network
The DVR may be manually configured by
assigning an IP address, subnet mask,
gateway DNS. Refer to page 19.
9
FireWire devices appear in
HDD Management as type 1394
Note
Up to 20 FireWire devices may be
connected in series.
