94
You can manually set the shutter speed and aperture to shoot images.
D stands for "Manual".
Set the mode dial to D.
Make the setting.
● Press the o button to select the shutter
speed or aperture value.
● Turn the  dial to set a value.
XThe set exposure level appears on the
indicator. You can check the difference to
the standard exposure level.
XWhen the difference is more than ±2
stops, the set exposure level appears in
red. When you press the shutter button
halfway, "-2" or "+2" appears in red.
D
Setting the Shutter Speed and
Aperture Value
Shutter Speed
Aperture Value
Standard Exposure Level
Indicator
Exposure Level
• The standard exposure is calculated according to the selected metering
method (p. 88).
• If you use the zoom after making settings or change the composition, the
exposure level may change.
• Depending on the shutter speed or aperture value set, the monitor
brightness may change. If the flash is set to h, the monitor brightness
will not change.
(EC260) CDI-E403_Guide_E.book Page 94 Thursday, December 18, 2008 2:02 PM
