2. LIST OF ERROR DISPLAY / INDICATION
Errors and warnings are displayed by the following ways:
1) Operator call errors are indicated by the Alarm LED lit, and the error and its solution are displayed on the LCD in
text and by icon.
2) Warnings are displayed on the printer driver Status Monitor.
3) Error codes are printed in the "operator call/service call error record" area in EEPROM information print.
2-1. Operator Call Errors (by Alarm LED Blinking in Orange)
Error
[Error code]
Message on the LCD
Solution Remarks
No paper (ASF). [1000]
Auto sheet feeder.
There is no paper. Load paper
and press [OK].
Set the paper in the ASF, and
press the Stop/Reset button.
No CD / DVD tray.
[1001]
*1
There is no CD-R tray. Attach
the tray and press [OK].
Set the CD / DVD tray, and press
the Stop/Reset button.
No paper in the front
paper feed cassette.
[1003]
Cassette.
There is no paper. Load paper
and press [OK].
Set the paper in the cassette, and
press the Stop/Reset button.
No CD or DVD. [1002]
*1
Printable disc is not set. Correctly
place a disc in the CD-R tray and
press [OK].
Set a CD or DVD in the CD /
DVD tray (which is ejected at
error occurrence), and inset the
CD / DVD tray in the proper
position. Then, press the
Stop/Reset button.
Paper jam. [1300]
The paper is jammed. Clear the
paper and press [OK].
Remove the jammed paper, and
press the Stop/Reset button.
Error in paper feeding
from the ASF.
Paper jam in the rear
guide. [1303]
Error in the duplex
printing unit.
Paper jam in the under
guide. [1304]
Error in paper feeding
from the cassette.
Front door close error.
[1250]
Paper output tray is closed. Open
the paper output tray.
Open the paper output tray. The error is indicated if
the paper output tray is
closed at start of a print
job, or while a print job
is being performed.
No ink. [1600]
Ink has run out. Replace the ink
tank and close the cover.
Replace the empty ink tank(s), or
press the Stop/Reset button.
Pressing the Stop/Reset
button will clear the
error without ink tank
replacement, however,
ink may run out during
printing.
Ink tank not installed.
[1660]
The following ink tank cannot be
recognized.
Install the applicable ink tank(s)
properly, and confirm that the
LED's of all the ink tanks light
red.
The print head is not
installed [1401], or it is
not properly installed
(print head temperature
sensor error [1403] /
faulty EEPROM data of
the print head [1405]
Print head is not installed. Install
the print head.
Install the print head properly.
The type of print head is
incorrect. Install the correct print
head.
Inner cover open. Inner cover is open. Close the Close the inner cover, and press
