Using Memory Lock
9-11
9
Special Sending/Receiving Features
4
Press [▼] or [▲] until <7.SYSTEM SETTINGS> appears ➞
press [Set].
If the prompt <SYSTEM SETTINGS PASSWORD> is displayed, enter the System
Administrator’s password using the numeric keys ➞ press (Set).
5
Press [▼] or [▲] until <1.MEMORY LOCK RX> appears ➞ press
[Set].
6
Press [▼] or [▲] to display <ON> ➞ press [Set].
If you select <OFF>, press (Stop) to return to the Standby mode.
7
Press [▼] or [▲] to display the desired Memory Lock setting ➞
press [Set].
The MEMORY LOCK RX menu includes the following items:
➞
➞
➞
Setting Description
1.MEM LOCK PASSWORD 0 to 9999999
This password protects the Memory Lock settings.
Setting a password is recommended. You must use
this password to unlock the memory so you can print
documents stored in memory.
Use the numeric keys to enter a password (up to
seven digits) ➞ press [Set].
Set
Set
Set
Set
Set
