152
2
Press the DISP. button.
• The camera will switch to color input
mode, and the display will alternate
between the original image and the
color swap image (using the
previously set color).
3
Aim the camera so that the original color
appears at the center of the LCD monitor and
press the button.
• Only one color can be specified.
• You can use the or button or the control dial to specify
the range of colors that are changed.
–5: Only takes the color that you want to swap.
+5: Also takes colors close to the one that you want to swap.
4
Aim the camera so that the desired color
appears at the center of the LCD monitor and
press the button.
• Only one color can be specified.
5
Press the DISP. button to complete the setting,
then shoot.
z The default setting for Color Swap changes green into white.
z You may not obtain the expected results if you use the flash.
z The colors and color range specified in the Color Swap mode
are retained even if the camera’s power is turned off.
