142
Responding to Error Messages
What to check on the camera
On the camera, IP address is set to [Auto assign]. Is this the
correct setting?
X If no DHCP server is used, configure settings after setting the IP
address to [Manual setting] on the camera (p.160).
What to check on the DHCP server
Is the power of the DHCP server on?
X Turn on the DHCP server.
Are there enough addresses for assignment by the DHCP
server?
X Increase the number of addresses assigned by the DHCP server.
X Remove devices assigned addresses by the DHCP server from
the network to reduce the number of addresses in use.
Is the DHCP server working correctly?
X Check the DHCP server settings to make sure it is working
correctly as a DHCP server.
X If applicable, ask your network administrator to ensure the DHCP
server is available.
21: No address assigned by DHCP server
