78
Specifications
AF area selection modes:
Single-point Spot AF (manual selection), Single-point AF
(manual selection), AF point expansion (manual
selection: up, down, left, and right), AF point expansion
(manual selection: surround), Zone AF (manual
selection), 61-point automatic selection AF
AF point automatic
selection conditions: Depending on EOS iTR AF setting (AF using color and
face detection information possible)
* iTR: Intelligent Tracking and Recognition
AF Configuration tool: Case 1 - 6
AI Servo characteristics:Tracking sensitivity, Acceleration/deceleration tracking,
AF point auto switching
AF fine adjustment: AF Microadjustment (All lenses by same amount or
Adjust by lens)
AF-assist beam: Emitted by the EOS-dedicated external Speedlite
• Exposure Control
Metering modes:
Approx. 100,000-pixel RGB metering sensor and 252-zone
TTL metering at max. aperture
EOS iSA (Intelligent Subject Analysis) system
• Evaluative metering (linked to all AF points)
• Partial metering (approx. 6.5% of viewfinder at center)
• Spot metering (approx. 2.5% of viewfinder at center)
• Center-weighted average metering
Metering range:
EV 0 - 20 (at 23°C/73°F with EF50mm f/1.4 USM lens, ISO 100)
*
Spot metering: EV 2 - 20
Exposure control: Program AE, Shutter-priority AE, Aperture-priority AE,
Manual exposure, Bulb exposure
ISO speed: Auto ISO, manually settable within ISO 100 - 51200
(Recommended (1/3-stop or whole-stop increments), and expandable to L
exposure index) (Equivalent to ISO 50), H1 (Equivalent to ISO 102400),
H2 (Equivalent to ISO 204800)
ISO speed settings: ISO speed range, Auto ISO range, and Auto ISO
minimum shutter speed settable
Exposure compensation:
Manual : ±5 stops in 1/3- or 1/2-stop increments
AEB :
±3 stops in 1/3- or 1/2-stop increments (Can be
combined with manual exposure compensation)
AE lock: Auto : Applied in One-Shot AF mode with evaluative
metering when focus is achieved
Manual : By AE lock button
