32
Basic Functions
Turning the Power On
To turn the power off
Press the ON/OFF button again.
• If the “Card locked!” message appears right after the power is
turned on, the SD card cannot record (p. 25).
• The Date/Time menu will appear the first time the camera power is
turned on or whenever the built-in rechargeable lithium battery
charge is low. Reset the date and time when this occurs (p. 28).
• If the power saving function activates, press the ON/OFF button to
restore power. (p. 33)
• You will hear a start-up sound and see the start-up image when the
power is turned on. (To change the start-up sound and image, see
pp. 124, 141)
• The start-up image does not display when the camera is connected
to a TV via the A/V OUT terminal.
Press the ON/OFF button until the
indicator blinks green.
• The lens extends when the mode switch is
set to or .
• The lens retracts approximately 1 minute
after changing the mode switch position
from or to .
