137
Printing, Transferring
to Printer
4
Connect the camera and printer using
the direct interface cable.
• When you insert the cable, make sure the
mark of the cable faces the front of the
camera.
5
Press the printer’s ON/OFF button to turn
on the power.
• When the printer is properly connected to the
camera, it powers up,
appears on the camera
LCD monitor and the power/mode indicator is lit
in green.
• With the Card Photo Printer CP-10, the power
turns on when the power cord is connected to
the printer as shown in Step 2.
Connecting to a Bubble Jet Printer
• Please read the user guide supplied with your BJ printer to see if it is compatible
with the direct print function, and for instructions on connection cables and
general operations.
1
Turn off the camera (p. 29).
2
Turn the BJ printer´s power on after you have connected the
power cord to the BJ printer and inserted the other end in a
power outlet.
3
Open the LCD monitor.
Direct Interface
Cable DIF-100
DIGITAL Terminal
