Troubleshooting Guide
424
If you use flash, the shutter will make two sounds each time you shoot
(p.217).
It indicates that the camera’s internal temperature is high. If the white
< > icon is displayed, the still photo’s image quality may deteriorate.
If the red <E> icon is displayed, it indicates that the Live View or
movie shooting will soon stop automatically (p.249, 287).
If [53: Wi-Fi] is set to [Enable], movie shooting is not possible. Before
shooting movies, set [Wi-Fi] to [Disable].
If the card’s writing speed is slow, movie shooting may stop
automatically. If the compression method is set to [IPB], use a card
with a reading/writing speed of at least 6 MB per sec. If the
compression method is set to [ALL-I] (I-only), use a card with a
reading/writing speed of at least 20 MB per sec. (p.3). To find out the
card’s reading/writing speed, refer to the card manufacturer’s Web
site.
If the movie shooting time reaches 29 min. 59 sec., the movie shooting
will stop automatically.
In shooting modes other than <a>, the ISO speed is set
automatically. In the <a> mode, you can freely set the ISO speed
(p.257).
The shutter makes two shooting sounds during
Live View shooting.
During Live View and movie shooting, a white < > or
red <E> icon is displayed.
I cannot shoot a movie.
Movie shooting stops by itself.
The ISO speed cannot be set for movie shooting.
