Redialing When the Line Is Busy
3-31
Basic Sending
3
The display for setting the number of redialing times appears.
❑ Press [F2] (–) or [F3] (+) to select the desired number of redialing attempts ➞
press [OK].
The display returns to the AUTO REDIAL menu.
NOTE
•
You can set the machine to redial from 01 to 10 times.
•
You can also use the numeric keys to enter the number of redialing attempts.
● If you want to set the redial interval:
❑ Press [F3] (▼) or [F4] (▲) to highlight <02 REDIAL INTERVAL> ➞ press [OK].
The display for setting the redial interval appears.
❑ Press [F2] (–) or [F3] (+) to select the desired redial time interval ➞ press [OK].
The display returns to the AUTO REDIAL menu.
NOTE
•
You can set the time interval from 02 to 99 minutes in one-minute increments.
•
You can also use the numeric keys to enter the redial time interval.
● If you want to resend a document after an error occurs:
❑ Press [F3] (▼) or [F4] (▲) to highlight <03 TX ERROR RESEND> ➞ press
[OK].
The TX ERROR RESEND menu appears.
F2
F3
OK
F3
F4
OK
F2
F3
OK
F3
F4
OK
