Chapter 3: Installation
3-6 DLE22-MA, DLE32-MA, DLE23-MA and DLE33-MA User’s Guide
3.5.1 Connecting UTP Cables to Ports 1 Through 24 of
the DLE22-MA and DLE32-MA
Ports 1 through 24 of the DLE22-MA and DLE32-MA are 10BASE-T
ports with internal crossovers. When connecting a workstation, use a
straight-through cable. When connecting networking devices, such as
another bridge, repeater, or router, use a crossover cable.
Connect a twisted pair segment to the DLE22-MA and DLE32-MA as
follows:
1. Ensure that the device connected to the other end of the segment is
powered ON.
2. Connect the twisted pair segment to the DLE32-MA or DLE22-MA by
inserting the RJ45 connector on the twisted pair segment into the
desired RJ45 port (Ports 1 through 24) as shown in Figure 3-2.
.
Figure 3-2 DLE22-MA and DLE32-MA Twisted Pair Connection
1413
56
78
910
11 12
15 16
17 18
19 20
21 22
23 24
RX (Receive)
LED
LKG-10954-98F
