Optional Installations and Mode Switch Bank Settings B-1
B
Optional Installations and
Mode Switch Bank Settings
This appendix covers the following items:
• Required tools (Section B.1)
• Locations, functions, and settings for the mode switches (Section B.2)
• Installing the SIMM (Section B.3)
• Installing HSIMs (Section B.4)
B.1 REQUIRED TOOLS
You need the following tools to perform the procedures provided in this appendix:
• Antistatic wrist strap (provided with 6C105 chassis)
B.2 SETTING THE MODE SWITCHES
These switches are set at the factory and do not need to be changed unless you intend to perform
the following:
• Force download a new image file from a BootP server.
• Clear NVRAM and restore all user-entered parameters such as the IP address and Subnet Masks
to the 6E233-49 SmartSwitch “Default” configuration settings.
• Clear user-entered passwords stored in NVRAM and restore the default passwords.
Figure B-1 shows the location of the mode switches and the switch settings for normal operation.
