4342
Troubleshooting
Troubleshooting
Problem:
Power LED does not come ON; WURE is not working.
Check your physical connections. If the LED indicators do not light,
the WURE may not be connected properly.
Solution:
Verify that the WURE is plugged into a power source. Check to see
that the cables are connected to the correct ports and that they are
secure.
Note: The WURE can be configured to extend the range of the
Belkin Wireless Router and is not guaranteed to be compatible with
other manufacturers’ devices.
Problem:
I can’t connect to the Internet wirelessly.
Solution:
If you are unable to connect to the Internet from a wireless
computer, please check the following items:
1. Look at the lights on your router. If you’re using a Belkin Router,
the lights should be as follows:
• The “Power” light should be on.
• The “Connected” light should be on, and not blinking.
• The “WAN” light should be either on or blinking.
2. Open your wireless utility software by clicking on the icon in
the system tray at the bottom right-hand corner of the screen.
If you’re using a Belkin Wireless Card, the tray icon should look
like this (the icon may be red or green).
3. The exact window that opens will vary depending on the model
of wireless card you have; however, any of the utilities should
have a list of available networks—those wireless networks it can
connect to.
Does the name of your wireless network appear in the results?
Yes, my network name is listed
– go to the troubleshooting solution
titled “I can’t connect to the Internet wirelessly, but my network
name is listed”.
