The Setup Wizard will start automatically for express
confi guration (recommended) Click “Next” to continue.
The fi rst step is to select your country and ISP, and click “Next”.
If your country and/or ISP is not listed, select “Other Country”
Now fi ll in the username and password you were supplied
by your Internet Service Provider (ISP) in to the blank fi elds.
It is important that the correct user name and password are
entered otherwise the connection will fail. Your ISP will be able
to confi rm your user name and password.
For more detailed instruction on other connection types, please refer
Now the Wireless LAN Setup screen will show. You can connect
to the Router via a wireless-LAN-enabled computer with the
following default wireless LAN settings:
SSID = Belkin G+ MIMO ADSL
Belkin strongly recommends that you enable wireless security to
WEP or WPA and change SSID to something of your own. Please read
the User Manual for details on levels of wireless security and how to
change your security settings.
Double-check the settings shown on the following screen.
You can click “Back” to change the settings. Or click “Next”
Now you have confi gured your modem router. Click on the OK
button to apply the settings. After a period of about 2 minutes
the connection with the Internet Service Provider will be
You can always restart the Setup Wizard or use the Navigation Menu
on the left to change your setting.
Congratulations! You have fi nished installing your new Belkin
Router. Click “OK” to activate your settings. To test your Internet
connection, open your browser and visit any website, such as www.
belkin.com. For more detailed installation information, refer to your
For latest software updates or if you have any further questions
regarding installation of this product, please visit www.belkin.
New Zealand: 0800 235 546
7 Bowen Crescent, West Gosford
Los Angeles, CA 90220, USA
© 2006 Belkin Corporation. All rights reserved. All trade names are
registered trademarks of respective manufacturers listed.
