User manual MIVD 1218
24
Auto..........................The display selects portrait or landscape
reproduction automatically, depending on the
orientation of the panel.
Portrait......................The image is reproduced in portrait orientation.
Landscape: The image is reproduced in
landscape orientation.
De-interlacing*
* Not in DVI mode – Visible only when the input signal is interlaced
This setting allows you to select the algorithm used to convert non-
interlaced into interlaced signals.
These are the possibilities:
Line rep. ...................Use the line repetition algorithm for moving
images. As a drawback, this algorithm may
cause flicker.
Field insert................Use this algorithm for static images
Median......................Use this algorithm for images containing static
and moving parts
Fuzzy........................This motion-adaptive algorithm, using fuzzy
logic, analyses the image content and selects a
de-interlacing method automatically.
In nearly all circumstances, this method gives
the best result and is the preferred de-
interlacing algorithm.
3.8. Advanced settings
To change the advanced settings:
1 Turn the control wheel to display the Advanced Settings menu.
2 Click the control wheel to enter the menu.
3 Turn the control wheel to select one of the categories: CAL
options, Meas. window, OSD, ALC, Scan mode, or Factory Reset.
4 Click the control wheel to enter the selected settings menu.
5 Turn the control wheel to change the setting.
6 Click the control wheel to confirm the change.
CAL options
Here you can change parameters for phase and level calibration
***MAIN MENU****
dv. settings
