Table 5: Do-Re-Mi sounds to confirm
Button LCD display Button
Press and hold the
Button for 6 second until
Do-Re-Mi sounded
DEFLT flashing Press & hold button for 2 seconds
to back to default setting and 1 chip for
confirm
D. PROGRAMMING LCD REMOTE:
Selecting and Adjusting Menu options:
• ? Press and hold F button for 1 second until 2 beeps sound, then release the F button.
• ? The text will flash on the LCD screen, press button to enter the menu.
• ? Press button to move up in the menu or button to move down in the menu.
• ? Press button to select the option you would like to adjust.
• ? Press button to increase the value, to activate or deactivate a function or to toggle through
• the selection.
• ? Press button to decrease the value, to activate or deactivate a function or to toggle
• through the selection.
• ? Press button to move to the next sub-option or go back to the main menu.
• EXIT: Press button to exit the menu mode.
Order Menu Option LCD display Functions
1 Parking Menu PARK METER Default is
- Parking hours 0:30
0 is flashing
, - Adjusts parking hour
(value from 0 to 2).
- Parking
minutes
0:30
30 is flashing
, - Adjusts parking minute
(value from 0 to 59).
- Toggle Parking
countdown
+ or
- Enables parking countdown.
There is a beep 5 min. before the Parking
countdown reaches 0.
- Disables parking countdown.
2 Illumination Menu Default is
- Toggle
Illumination Mode
3 SEC. or
5 SEC. or
OFF
, Basic operation with backlight
Illumination 3 SEC. or 5 SEC.;
OFF – basic operation without backlight
Illumination.
