1) Make the connections to the vehicle for the 18 pin wiring harness (Source Component Harness(s),
Power Harness ect.)
2) Connect the 18 Pin Harness to the mating connector on the Video Monitor.
3) If required, plug the Source Component Harness(s) into the Din Connection(s) on the 18 Pin Harness
(snap on the cable clamps).
4) Connect power harness to vehicle electrical system by tapping into an accessory hot line and also a
ground.
5) Connect 8 pin wiring harness from video monitor to the mating connector on FM Modulator.
6) Connect the FM Modulator to the Vehicle Radio.
7) Verify all functions of the System before final mounting of the finished assembly.
NOTE: Other A/V Components can be connected to the video monitor system using a second Source
Component Harness (purchased separately, PN 8010730).
A/V Source Definitions:
1 = Built-in DVD
2 = AV1 input (VCP, game or future DVD, etc)
3 = AV2 input (VCP, game or future DVD, etc)
4 = AUX input (VCP, game or future DVD, etc)
-6-
VOD705DL
Optional 8010730
Cable Clamp
Cable Clamp
Sold Seperately
Optional IR LED Adapter Cable (see NOTE)
Red/Black (Lamp On)
Violet/Brown (Lamp Auto)
Black/Red (Lamp Common)
Optional Hard Wired FM Modulator Output
TO
FACTORY
RADIO
Dash Radio
FM
Modulator
1070610
Refer to ins struction with the the RF
Modulator Kit for further details.
12VDC Power and
Ground
Am/Fm
Antenna
Power Harness Item #4
Black Ground
Red +12VDC
To Car Audio
In L/R
Video In
Audio-L
Audio-L
Video In
Audio-L
Audio-L
JST IR
Input Connector
JST IR
Input Connector
FUSE
VIDEO IN
AUDIO -R
AUDIO -L
Power
Connector
4 pin
JST IR Input
Optional IR LED Adapter Cable (see NOTE)
If the VCP to be installed is not equipped
with a JST IR Input, use the Optional IR
LED Adapter Cable (supplied/connected
to the Source Component Harness). To connect
the IR LED to the VCP, clean the IR
Receiver Window on the front of the VCP.
Remove the adhesive backing and appl
IR
LED directl
onto the IR Receiver Window.
NOTE:
Source Component Harness
Source Component Harness
AV 1
Primar
AV 2 Secondary
Optional for Receivers with Level Audio InputLow
TO
FACTORY
RADIO
18 Pin
8 Pin
P/N 112-B3112
