2
Figure 1 - Typical Air Bottle Jack Nomenclature
Model Capacity
Base Size
(L x W)
Saddle
Diameter
Min.
Height
Max.
Height
Hydraulic Lift
Ext.
Screw
ATD-7370 12 Ton 8" x 6-1/2" 1-5/8" 9-1/2" 18-1/2" 5-1/2" 3-1/2"
ATD-7371 20 Ton 8-1/2" x 7-1/4" 2" 9-3/4" 18-3/4" 5-1/8" 3-7/8"
ATD-7372 20 Ton 8-1/2" x 7-1/4" 2" 8-1/8" 15-1/2" 4" 3-3/8"
Lift Control Valve
Carry Handle
Air Motor
Release Valve
Saddle/Extension Screw
Oil Filler Screw/ Plug*
Quick Coonnector (N/A for ATD-7372)
Air Hose
Handle
(*) oil ller plug for ATD-7370
Ram
Handle Sleeve
SPECIFICATIONS
Inspect before each use. Do not use if broken, bent, cracked, or damaged parts (including labels) are noted. Any jack
that appears damaged in any way, operates abnormally or is missing parts, shall be removed from service immediately. If
the jack has been or suspected to have been subjected to a shock load (a load dropped suddenly, unexpectedly upon it),
immediately discontinue use until jack has been checked by an authorized factory service center
(contact distributor or
manufacturer for list of Authorized Service Centers)
. It is recommended that an annual inspection be done by qualied
personnel. Labels and Operator's Manuals are available from manufacturer.
!
Air Actuated Hydraulic Bottle Jacks are designed to lift, not support, rated capacity loads consisting of one end of
a vehicle. Immediately after lifting, the load must be supported by a pair of appropriately rated jack stands. Ensure
that air source can dedicate 7.8 CFM @ 110-175 psi. A minimum of 150 psi air pressure is required to raise rated
capacity load.
PRODUCT DESCRIPTION
Never use hydraulic jack as a stand alone device. After lifting, immediately support the lifted load
with a pair of appropriately rated jack stands. Never place any portion of your body under a load
when lifting or lowering the load.
SAFETY and GENERAL INFORMATION
Save these instructions. For your safety, read, understand, and follow the information provided with and on this jack
before using. The owner and operator of this equipment shall have an understanding of this jack and safe operating
procedures before attempting to use. The owner and operator shall be aware that use and repair of this product
may require special skills and knowledge. Instructions and safety information shall be conveyed in the operator's
native language before use of this jack is authorized. If any doubt exists as to the safe and proper use of this jack,
remove from service immediately.
