Safety Markings
(a) Study, understand, and follow all instructions before operating this device.
(b) Do not exceed rated capacity.
(c) Use only on hard level surface.
(d) Use only for emergency tire changing or mounting tire chains.
(e) Never get beneath the vehicle when it is supported by the jack.
(f) If vehicle is pushed off of jack, discard jack. Do not reuse.
(g) Failure to heed these markings may result in personal injury and / or property damage.
Safety Messages
(a) Activate the hazard warning flasher, turn off ignition, set parking brake, move automatic shift selector
to park position. In case of a manual transmission, move gear selector into reverse position. In addition,
the wheel diagonally opposite from the wheel that is being lifted shall be chocked in both directions.
(b) Place jack only at points of the vehicle as specified by the vehicle manufacturer.
(c) Follow tire changing procedure or tire chain mounting procedure as specified in the vehicle
manufacturer’s owner’s manual.
(d) No alterations shall be made to this product.
Instructions For Use
1. Insert the jack handle into the hole of the handle socket.
2. Make sure that the saddle is correctly positioned. To prevent damage to the jack, do not move the jack
while the handle is intact in the socket.
3. To raise load, use one hand to hold the front part of the handle, and use the other hand to turn
slowly at the rear end of the handle clockwise.
4. To lower load, use one hand to hold the front part of the handle, and use the other hand to turn
slowly at the rear end of the handle counterclockwise.
