5
SETTING UP THE PROJECTOR
1 Place the projector on a flat surface.
• The projector must be within 6 feet (1.8 m) of your power
source and your computer.
• If you want to project from behind a translucent screen, set
up the projector behind your screen. See “Rear” on page 24
to reverse the image.
2 Position the projector the desired distance from the screen.
NOTE: The projector must be at
least 4.9 feet (1.5 m) from the
projection screen.
•
If the image is too big or too small, use the zoom ring to
adjust the size or move the projector forward or backward.
Figure 5 shows three projected image sizes. For more infor-
mation about image size, see “Projected Image Size” on
page 38.
FIGURE 5
Projected image size
3 Make sure the projector and the computer are turned off.
3
.
3
f
t
.
/
1
m
2
2
.
2
f
t
.
/
6
.
7
f
t
/
4.9 ft./
9.9 ft./
33 ft./
10m
6
.
8
m
2
m
3m
1.5m
M2+.book Page 5 Thursday, April 8, 2004 8:10 AM
