DEH W/AC
To allow dehumidification during
active air conditioning, select
ENABLED and press MODE.
To disable dehumidification when
the air conditioning is on, select
DISABLED and Press MODE.
RH Offset
An offset can be applied to the
on-board humidity humidity
reading to avoid discrepancies
with other humidity measuring
devices in the home. Use the UP/
DOWN arrows to select an offset
from -5% to 5%. Press MODE to
exit the installer set-up screens.
SYSTEM SET-UP & CHECKOUT (CONTINUED)
Zone
If installing the dehumidifier in
a single zone application, select
DISABLED and press MODE to go
to the EXTERNAL control screen
selections.
If installing the dehumidifier in
a two-zone application, use the
UP or DOWN arrows to select
ENABLED and press MODE to go
to the EXTERNAL control screen
selections.
External Control
If using the dehumidifier on-board
control select DISABLED and
press MODE to go to the
dehumidificaiton with air
conditioning (DEH W/AC) screen
selections.
If using a Model 76, Model
8910, or Model 8620 as an
external control or other third-
party external control, such as
a thermostat with dehumidifier
outputs, use the UP or DOWN
arrows to select ENABLED
and press MODE to go to
the dehumidification with air
conditioning (DEH W/AC) screen
selections.
16
