83-EN
1 In PCM OUT MODE, press 1 ( ) or 5 ( ),
select “Dolby PL II [Dolby Pro Logic II]”, then
press 2 (ENT).
2 Press 1 ( ) or 5 ( ), select “CENTER WIDTH
[Center Width]”, then press 2 (ENT).
3 Press 1 ( ) or 5 ( ), select “MODE ON/OFF
[Center Width ON/OFF]”.
4 When OFF, press 1 ( ) after pressing
2 (ENT) to switch ON.
To switch from ON to OFF, press 5 (
) after
pressing 2 (ENT).
With this setting ON, the vocal position
between the center speaker and the L/R
speaker can be optimized.
5 Press 1 ( ) or 5 ( ), select “LEVEL [Level]”,
then press 2 (ENT).
6
Press 1 ( ) or 5 ( ), select the level to be
adjusted, then press 6 (RTN).
The level can be adjusted between 0 to 7.
Increasing the level causes the center stage
position to move away from the center
speaker towards the Left and Right speakers.
When “PL II MUSIC [Dolby PL II MUSIC]” is selected, various other settings can be made, as
described below.
• Center width adjustment (CENTER WIDTH)
When “PL II MUSIC” is selected
Continued
CENTER WIDTH
LEVEL 0
The vocal position between the center speaker and the L/R speaker can be optimized.
CENTER WIDTH
Center Width OFF
Level 0dB
CENTER WIDTH
Center Width OFF
Level 0dB
