260 Chapter 5
Language Reference
MEASure Group of Commands
not
specified
or n=1
iDEN
mode
Returns 13 comma-separated scalar results, in the following
order:
1. Center frequency – relative power (dB)
2. Center frequency – absolute power (dBm)
3. Lower offset frequency – relative power (dB)
4. Lower offset freq– absolute power (dBm)
5. Upper offset frequency – relative power (dB)
6. Upper offset frequency – absolute power (dBm)
7. Total power (dBm)
8. Offset frequency (Hz)
9. Reference BW (Hz)
10.Offset BW (Hz)
11.Carrier/center frequency (Hz)
12.Frequency span (Hz)
13.Average count
Total power
reference
not
specified
or n=1
Basic,
cdmaOne,
cdma2000,
W-CDMA
(3GPP), or
W-CDMA
(Trial &
Arib) mode
Returns 24 comma-separated scalar results, in the following
order:
1. Upper adjacent chan center frequency - relative power (dB)
2. Upper adjacent chan center frequency - absolute power
(dBm)
3. Lower adjacent chan center frequency - relative power (dB)
(same as upper)
4. Lower adjacent chan center frequency - absolute power
(dBm) (same as upper)
5. Negative offset frequency (1) - relative power (dB),
6. Negative offset frequency (1) - absolute power (dBm)
7. Positive offset frequency (1) - relative power (dB)
8. Positive offset frequency (1) - absolute power (dBm)
. . .
1. Positive offset frequency (5) - relative power (dB)
2. Positive offset frequency (5) - absolute power (dBm)
Measurement
Type
n Results Returned
