8.0
HOLD FUNCTION
• Due to the baby’s movement, the weight shown on the display will change
all the time. After the baby is placed on the scale, press [HOLD] to hold
the weight value. The display shows ‘hold’. The scale will calculate the
average of the former weight values taken automatically.
• The display will be locked when the [HOLD] key is pressed. The display
will show a flashing ‘’
” symbol at the top of the display indicating the
baby’s weight is held.
• The scale will return to normal weighing when the [HOLD] key is pressed
a second time or when the display is zeroed or tared with no weight on the
scale.
9.0 AUTOMATIC POWER SWITCH OFF
• The scale is operated using one PP3 9V alkaline battery in the internal
battery chamber.
• The typical battery life is 12 hours.
• The scale includes the feature to turn the power off after 30 seconds if it is
not being used. This helps to maximise the battery life.
• If the battery is low on charge, “LO” will be displayed. The scale will be
automatically switched off after 5 minutes.
.
• The battery should be replaced by new ones.
• Do not throw away the discharged battery together with the domestic
rubbish. For disposal, take those to the junk battery collector.
• Contact your supplier for more information.
© Adam Equipment Company 2004
7
