4
Adam Equipment Company 2012
2.3 ADD
FUNCTION
The ADD function allows you to accumulate and show a total number of notes
that are being counted as well as a count for each separate counting process.
When in ADD mode the ADD LED will light up.
Press the [ADD] key and the BATCH display will show 0.
Place the notes into the guides at the rear of the machine and the counter will
feed the notes through. The Main display and the BATCH display will both show
the same amount of notes that have been counted. The counter will continue
to work like this when more notes are added to the machine.
When the notes are removed from the holder at the front and the next amount
of notes are placed into the machine the BATCH display will reset to 0. Once
the notes have been fed through the BATCH display will show the quantity of
this last count only and the Main display will show the total of the two counts.
Continue like this until all of the notes are counted. When finished the Main
display will show you the total of all counting processes that have been made.
The BATCH display will always show the last quantity of notes counted from
when any previously counted notes have been removed from the holder at the
front of the machine.
Press the [ADD] key to return to normal counting and the LED will go out.
Note: ADD and BATCH can be enabled together.
In this case the counter will always stop when the required quantity is met and
then continue when the notes are removed from the holder at the front. The
Main display will accumulate all countings and give a total count at the end and
the Batch display will show the required Batch quantity.
