Page 2
4. Connect the supplied Power Adapter and power on.
5. Check the LEDs
• The Power, Internet, and WLAN LEDs should be ON.
• For each active LAN (PC) connection, the LAN LED should be ON.
o
Configuration
The Wireless Router can "Plug and Play" if your DSL/Cable modem connec-
tion uses only a dynamic IP address.
Testing Plug and Play
1. Power up the DSL/Cable modem.
2. Power up the Wireless Router.
3. Power up the PCs.
4. On the PC, start your Web Browser, and try to connect to a well-known
site, such as www.microsoft.com
• If this doesn't work, follow the procedure in the next section Manual
Configuration.
• If this works on some PCs, but not all, see PC Setup for details on con-
figuring the PCs which do not work.
