Filter
Top Products
8. Make sure that all parts are properly tightened before you use the treadmill. Note: Extra hardware may
be included. Keep the included allen wrenches in a secure place; the large allen wrench is used to adjust the
walking belt (see page 14). To protect the floor or carpet, place a mat under the treadmill.
5
66
14
7
7
7. Attach the Storage Latch (66) to the Left Upright (14) with two
3/4” Screws (5). Be careful not to overtighten the Screws.
6. Lower the Uprights (14, 15) until the Handrails (4) are
touching the floor.
See drawing 6a. Position the Uprights (14, 15) so the
t
readmill Frame (84) is centered between them.
See drawing 6. Firmly tighten the four 2 1/2” Bolts (10),
the 1” Bolts (16), and the 3/4” Screws (5) used in as-
sembly step 5.
Raise the Uprights (14, 15) to the vertical position.
14
1
4, 15
4
84
15
Top View
6
6a
1
0
16