Filter
Top Products
ASSEMBLY
T
o hire an authorized service technician to assemble the treadmill, call toll-free 1-800-445-2480.
Assembly requires two persons. Set the treadmill in a cleared area and remove all packing materials; do not
dispose of the packing materials until assembly is completed. Do not remove the long plastic tape is inside
the Right Handrail until told to. Note: The underside of the treadmill walking belt is coated with high-performance
lubricant. During shipping, a small amount of lubricant may be transferred to the top of the walking belt or the
shipping carton. This does not affect treadmill performance. If there is lubricant on top of the walking belt, simply
wipe off the lubricant with a soft cloth and a mild, non-abrasive cleaner.
Assembly requires the included allen wrench and your own phillips screwdriver ,
adjustable wrenches , and 9/16” socket wrench , wire cutters .
Note: To identify small parts used during assembly, see the PART IDENTIFICATION CHART in the center of
this manual.
2
31
6
17
Large
Hole
71
12
12
7
Bend
5
1. Hold the Base
(71) in the posi-
tion shown.
Identify the
Right Handrail
(6), which has a
large hole near
the lower end.
Hold the Right Handrail with the bend in the position
shown.
Using a 9/16” socket wrench and the included allen
wrench, attach the Right Handrail (6) to the Base (71) with
two Handrail Bolts (12), two Formed Washers (31), and
two Nuts (17). Do not tighten the Handrail Nuts yet.
Attach the Left Handrail (7) to the Base (71) in the same
way.
!
!
2. Position the treadmill near the Handrails (6, 7) as shown. A
long plastic tape is inside the Right Handrail (6). Secure
the end of the plastic tape to the Wire Harness (22) with
the included plastic tie. Pull on the other end of the tape
to pull the Wire Harness through the Right Handrail and
out of the top.
With the help of a second person, raise the Handrails (6,
7) so that the Base (71) is resting flat on the floor.
7
22
71
6
2
22
6
Tie
Tape