Wenger 621.104 Watch User Manual


 
10
11
Setting the Second Time Zone Hand
Note: The second time zone is read in military time
(1:00 p.m. = “13”, 2:00 p.m. = “14”, etc.). The
military time hours appear on the dial of the watch.
1. Pull crown out to Position 2 (one “click” out).
2. Depress and hold down Left Pusher until the
second time zone hand (with arrow at end)
reaches the desired time. Release and depress
in short intervals to slowly advance the second
time zone hand.
3. Return the crown to the fully depressed Position 1.
Setting and Activating the Alarm
The alarm indicator is the hand with the red tip.
This hand indicates the time at which the alarm
would sound once activated.
1. Pull crown out to Position 2.
2. Rotate crown counterclockwise until the desired
alarm time is set.
Note: The 45, 30 and 15 numerals between the
hours indicate minutes between hours which will
help increase the accuracy of the alarm.
3. Push the crown back to the fully depressed Position 1.
4. Depress Right Pusher. You will hear a double beep. This turns the alarm on.
5. Depress Right Pusher. You will hear a single beep. This turns the alarm off.
6. Once the alarm sounds, depress Right Pusher to stop it.
ALARM - GMT
27
28
29
60
30
45 15
1
8
1
9
2
0
2
1
2
2
2
3
2
4
1
2
3
4
5
6
1
5
3
0
4
5
1
5
3
0
4
5
1
5
3
0
4
5
1
5
3
0
4
5
1
5
3
0
4
5
1
5
3
0
4
5
1
7
1
6
1
5
1
4
1
3
1
2
1
1
1
0
9
8
7
4
5
3
0
1
5
4
5
3
0
1
5
4
5
3
0
1
5
4
5
3
0
1
5
4
5
3
0
1
5
4
5
3
0
1
5
ALARM - GMT
27
28
29
60
30
45 15
1
8
1
9
2
0
2
1
2
2
2
3
2
4
1
2
3
4
5
6
1
5
3
0
4
5
1
5
3
0
4
5
1
5
3
0
4
5
1
5
3
0
4
5
1
5
3
0
4
5
1
5
3
0
4
5
1
7
1
6
1
5
1
4
1
3
1
2
1
1
1
0
9
8
7
4
5
3
0
1
5
4
5
3
0
1
5
4
5
3
0
1
5
4
5
3
0
1
5
4
5
3
0
1
5
4
5
3
0
1
5