Filter
Top Products
3. Place the bracket on the lower end of the Butterfly
Upright (1) over the indicated 5/16Ó x 2 1/2Ó Carriage
Bolts (92) in the Butterfly Base (4). Hand tighten two
5/16Ó Nylon Locknuts (64) onto the Bolts. Do not
tighten the Nylon Locknuts yet.
3
6
4. Press three 2Ó Square Inner Caps (28) into the
Butterfly Top Frame (33). Press two 1Ó Round Inner
Cap (86) into the top of the Butterfly Top Frame (33).
Attach the Butterfly Top Frame (33) to the indicated
bracket at the top of the Butterfly Upright (1) with two
5/16Ó x 2 3/4Ó Bolts (89), a Support Plate with 3 1/2Ó
center holes (93), and two 5/16Ó Nylon Locknuts (64).
4
64
28
93
1
1
4
92
28
28
33
64
89
86
5. Attach the Butterfly Seat Frame (14) to the Front Leg
(20) with two 5/16Ó x 2 3/4Ó Bolts (89), two 5/16Ó
Washers (36), and two 5/16Ó Nylon Locknuts (64). Do
not tighten the Nylon Locknuts yet.
Slide the bracket on the Front Leg (20) onto the two
5/16Ó x 2 1/2Ó Carriage Bolts (92) in the Butterfly Base
(4). Hand tighten two 5/16Ó Nylon Locknuts (64) onto
the Bolts. Do not tighten the Nylon Locknuts yet.
Attach the Butterfly Seat Frame (14) to the Butterfly
Upright (1) with two 5/16Ó x 2 3/4Ó Bolts (89), two
5/16Ó Washers (36) and two 5/16Ó Nylon Locknuts
(64). Do not tighten the Nylon Locknuts yet.
5
89
4
89
36
64
14
20
92
36
1
64
64
64
64