Filter
Top Products
8
3. Press a 50mm Thick Square Inner Cap (47) into
the Leg Lever Base (5). Press two 50mm x 75mm
Inner Caps (46) into the Foot Plate (6).
Attach the Leg Lever Base (5) to the Butterfly
Upright (2) with two M10 x 75mm Bolts (82), an
M10 x 95mm Bolt (105), an M10 Washer (99),
and three M10 Nylon Locknuts (101). Do not
tighten the Locknuts yet.
Attach the Foot Plate (6) to the Leg Lever Base
(5) with two M10 x 65mm Carriage Bolts (88) and
two M10 Nylon Locknuts (101). Do not tighten
the Locknuts yet.
4. Insert the two Weight Guides with Rings (19) into
the indicated holes in the Base (1). Attach the
Weight Guides with Rings to the Base with two
M10 x 65mm Bolts (80), four M10 Washers (99),
four 12.5mm Spacers (69), and two M10 Nylon
Locknuts (101).
Insert the two Weight Guides (18) into the indicat-
ed holes in the Base (1). Attach the Weight
Guides to the Base with two M10 x 65mm Bolts
(80), four M10 Washers (99), four 12.5mm
Spacers (69), and two M10 Nylon Locknuts (101).
3
4
5
105
46
88
6
46
82
99
101
101
101
101
47
2
19
18
101
1
80
99
99
99
99
69
69
69