Filter
Top Products
8
6. Press four 25mm Square Inner Cap (28) into two
Backrest Tubes (12).
Attach the Backrest Tubes (12) to the Backrest
Bracket (10) with four M6 x 38mm Bolts (40), four
M6 Washers (36), and four M6 Nylon Locknuts
(29).
7. Insert the Backrest Bracket (10) into the slot in
the Bench Frame (1).
Lubricate an M10 x 168mm Bolt (41) with grease.
Attach the Backrest Tubes (12) to the Bench
Frame (1) with the Bolt and an M10 Nylon
Locknut (48). Do not overtighten the Locknut;
the Backrest Tubes must be able to pivot easi-
ly.
29
29
10
41
48
Lubricate
1
10
12
28
28
7
40
12
36
36
36
36
40
6
5
48
34
26
26
26
31
47
30
47
42
35
Lubricate
33
16
3
2
5. Press three 45mm Square Inner Caps (26) into
the Leg Lever (3). Press a 25mm Round Inner
Cap (33) into the Weight Tube (16).
Attach the Weight Tube (16) to the Leg Lever (3)
with an M8 x 58mm Bolt (42), two M8 Washers
(47), a 10mm Spacer (30), and an M8 Nylon
Locknut (31). Press a 25mm Round Angled Cap
(34) onto the end of the Weight Tube.
Lubricate an M10 x 65mm Bolt (35) with grease.
Attach the Leg Lever (3) to the Front Leg (2) with
the Bolt and an M10 Nylon Locknut (48). Do not
overtighten the Locknut; the Leg Lever must
be able to pivot easily.