Filter
Top Products
5
1. Before assembling this product, make sure you
understand the information in the box above.
Position the Rear Stabilizer (2) with the warning decal
facing up as shown. Note that on one side of the
Rear Stabilizer there is an indentation around each of
the two holes. Push two M10 x 90mm Carriage Bolts
(21) through the holes in the Stabilizer so the bolt
heads fit into the indentations.
Slide the bracket on the Main Frame (1) onto the two
M10 x 90mm Carriage Bolts (21) in the Rear
Stabilizer (2) and secure it with two M10 Nylon
Locknuts (18).
Press a 76mm Round Endcap (10) onto each end of
the Rear Stabilizer (2).
1
Before beginning assembly, carefully read the
following information and instructions:
¥ Assembly requires two people.
¥ Place all parts in a cleared area and remove the
packing materials. Do not dispose of the packing
materials until assembly is completed.
¥ Tighten all parts as you assemble them, unless
instructed to do otherwise.
¥ For help identifying the small parts, use the PART
IDENTIFICATION CHART in the center of the
manual.
¥ As you assemble the weight bench, make sure all
parts are oriented as shown in the drawings.
The following tools (not included) are required
for assembly:
¥ Two (2) adjustable wrenches
¥ One (1) rubber mallet
¥ One (1) standard screwdriver
¥ One (1) phillips screwdriver
¥ Lubricant, such as grease or petroleum jelly
plus soapy water.
Assembly will be more convenient if you have the
following tools: A socket set, a set of open-end or
closed-end wrenches or a set of ratchet wrenches.
Assembly
Make Things Easier for Yourself!
Everything in this manual is designed to ensure
that the assembly of our products can be complet-
ed successfully by anyone. However, it is impor-
tant to recognize that your new equipment is a
sophisticated product with many small parts and
consequently, the assembly process will take
time. Most people find that by setting aside plenty
of time, and by deciding to make the task enjoy-
able, assembly will go smoothly.
1
10
10
18
18
21
Decal
2
18
18
10
2
21
10