Filter
Top Products
9. Lubricate an M10 x 75mm Bolt (5). Attach the
Bench Frame (33) to the Cross Brace (30) with the
M10 x 75mm Bolt and an M10 Nylon Locknut (4).
The Bench Frame must be turned as shown. Do
not overtighten the Nylon Locknut.
Attach the Bumper (24) to the Bench Frame (33)
with an M4 x 25mm Screw (44).
Press a 38mm x 50mm Inner Cap (16) into the
Bench Frame (33).
10. Press a 38mm x 50mm Inner Cap (16) into each
end of the Front Leg (20).
Lubricate an M10 x 75mm Bolt (5). Attach the Front
Leg (20) to the Bench Frame (33) with the M10 x
75mm Bolt (5) and an M10 Nylon Locknut (4). Do
not overtighten the Nylon Locknut.
11. Press two 38mm x 50mm Inner Caps (16) into the
Leg Lever (28). Press a 1” Round Inner Cap (21)
into the Front Leg. Press an Angled Round Cap
(32) onto the Leg Lever.
Lubricate an M10 x 75mm Bolt (5). Attach the Leg
Lever (28) to the Front Leg (20) with the M10 x
75mm Bolt (5) and an M10 Nylon Locknut (4). Do
not overtighten the Nylon Locknut.
Slide a Weight Stop (45) onto the Leg Lever (28).
12. Attach both Backrest Brackets (38) to the Backrest
(36) with four M6 x 16mm Screws (6). The
Backrests must be oriented as shown.
12
9
10
11
9
38
4
30
33
24
16
44
16
16
33
20
4
4
28
16
32
36
6
6
5
Lubricate
Lubricate
5
5
Lubricate
20
21
45
16