Filter
Top Products
16
34. Wrap the Military Press Cable (72) around a
“V”-Pulley (50). Attach the “V”-Pulley to the
Top Frame (55) with a 3/8” x 2 1/2” Bolt (86)
and a 3/8” Nylon Locknut (21).
Wrap the Military Press Cable (72) around a 3
1/2” Pulley (15). Attach the Pulley to the indi-
cated bracket on the Assist Arm (105) with a
3/8” x 1 3/4” Bolt (76) and a 3/8” Nylon
Locknut (21). Be sure that the Cable is
between the Pulley and the Assist Arm
and that the Cable and Pulley move
smoothly.
35. Wrap the Military Press Cable (72) around a
“V”-Pulley (50). Attach the “V”-Pulley and a
Long Cable Trap (31) to the Assist Upright
(74) with a 3/8” x 4 1/2” Bolt (112), a 3/8” Flat
Washer (9), and a 3/8” Nylon Locknut (21). Be
sure that the Long Cable Trap is turned to
hold the Cable in place and that the Cable
is routed around the Pulley as shown.
Wrap the Military Press Cable (72) around a
3 1/2” Pulley (15). Attach the Pulley to the
other bracket on the Assist Arm (105) with a
3/8” x 1 3/4” Bolt (76) and a 3/8” Nylon
Locknut (21). Be sure that the Cable is
between the Pulley and the Assist Arm
and that the Cable and Pulley move
smoothly.
34
CABLE ASSEMBLY
Bracket
105
76
50
15
21
21
55
86
72
35
105
9
21
21
74
50
31
15
76
72
Bracket
11