Filter
Top Products
8
6. Attach the Backrest (13) to the Backrest Frames
(12) with four M6 x 40mm Bolts (49) and four M6
W
ashers (48). D
o not tighten the Bolts yet.
8. Attach the Seat (14) to the Bench Frame (1) with
four M6 x 16mm Screws (39).
7. Insert the Backrest Bracket (10) through the
Bench Frame (1).
Grease an M10 x 168mm Bolt (50). Attach the
Backrest Frames (12) to the Bench Frame (1)
with the Bolt and an M10 Nylon Locknut (43).
Do
not overtighten the Nylon Locknut; the
Backrest Frames must pivot easily.
Attach the Adjustment Pin (25) to the Bench
Frame (1) with an M4 x 16mm Screw (45).
Engage the Pin into the Bench Frame and the
Backrest Bracket (10).
Tighten the M6 x 40mm Bolts (49) and M6
Nylon Locknuts (51) used in steps 5 and 6.
12
10
43
50
25
45
1
8
39
1
14
1
3
12
48
49
12
7
49
48
48
6