Filter
Top Products
7
4
2. Lift the Weight Rest (9) in the Right Upright (7)
and secure it in a raised position with a Weight
Rest Knob (23).
Attach the Right Upright (7) to the right Crossbar
Extension (5) with four M10 x 76mm Bolts (38),
two Joint Plates (18), and four M10 Nylon
Locknuts (48).
Do not tighten the Locknuts yet.
Repeat this step with the Left Upright (not
shown).
3. Attach the Front Leg (2) to the Bench Frame (1)
with two M10 x 65mm Bolts (35), two M10
Washers (46), and two M10 Nylon Locknuts (48).
Do not tighten the Locknuts yet.
4.
Attach the Bench Frame (1) to the center holes in
the Crossbar (4) with two M10 x 72mm Bolts (43)
and two M10 Nylon Locknuts (48).
T
ighten the M10 Nylon Locknuts (48) used in
steps 1–4.
3
2
35
35
18
38
38
18
2
48
5
48
48
48
46
46
1
1
43
43
4
Center
Holes
7
23
9