Filter
Top Products
7
X6600HRT GENERAL
STABILIZING THE ELLIPTICAL TRAINER
After positioning the Elliptical
Trainer in its intended location,
check its stability by attempting to
rock it side to side. Rocking or
wobbling indicates that your
Elliptical Trainer needs to be
leveled. Determine which leveler is
not resting completely on the floor.
Loosen the nut at the base of the
leveler to allow the leveler to
rotate. Now rotate the leveler to
the left or right until the Elliptical
Trainer is stable. Lock the
adjustment by tightening the nut
against the rear foot support.
SELF-POWERED FEATURE
The
X6600HRT
is self-powered, requiring no external power source.
When a user strides at a speed above 20 revolutions per minute (RPM),
the power is generated to allow the Elliptical Trainer to function properly.
Because of this self-generating feature, the console feedback will fade
away when you cease pedaling. The console does, however, use a 9-volt
battery as backup to save your feedback information for 30 seconds from
the time you stopped striding. If you resume striding within the 30 seconds,
the information will reappear. If the information does not appear within the
30 seconds, your battery may need to be plugged in or replaced.