Filter
Top Products
8
621-D East Lake Street • P.O. Box 280 • Lake Mills. WI 53551
toll free 1.800.335.4348 • phone 1.920.648.4090 • fax 1.920.648.3373
www.visionfitness.com
2001 Vision Fitness. All Rights Reserved. 4.01 Part #Z60EP08-AG1801PRD
AG18.01PRD U.S. Patent No. 6,190,289
REV3
5
STEP
• Slide a large wavy washer
(M26) onto the console mast axle.
Locate and slide the right upper
handlebar bracket onto the console
mast axle and attach with a washer
(M8 x 35) and M8 NyLock nut, using
the 13
MM
wrench. Snap the plastic
13
MM
nut caps over the nuts.
• Slide a small wavy washer (M16)
onto the lower pedal arm support,
followed by the right lower arm.
Attach with a washer (M8 x 25) and
bolt (M8 x 12
MM
), using the Blue 5
MM
Allen wrench.
• Pivot the lower arm and insert the
top end into the upper handlebar
bracket. Attach with bolts (M7 x 35
MM
)
and (M6 x 12
MM
) through the side,
and bolts (M8 x 12
MM
) from the front.
Tighten using the Blue 5
MM
Allen
wrench.
• Repeat the above steps to attach the
left-hand upper and lower arms.
BLACK BAG
5
STEP