Filter
Top Products
5
1
STEP
2
STEP
1
STEP
• Fold up the right-hand console mast
to the vertical position. Be sure not to
pinch the data cables.
• Insert the bolt (M8 x 50L) in the side
and tighten with the blue-handled 5mm
Allen Wrench.
• Insert one bolt (M8 x 20L) in the front
and tighten with the blue-handled
5mm Allen Wrench.
• Repeat this on the opposite side.
NOTE: There are no data cables on
the left side.
ORANGE BAG
2
STEP
• Slide the base side covers down the
left-hand and right-hand console
masts.
• Fold the treadmill to the vertical
position.
• Secure the right-hand base side
cover to the base frame. Use the
V-head screw (M4 x 12L) for the rear
of the cover and the Flat screws
(M4 x 12L) for the front of the cover.
Repeat this step on the left-hand side.
• Unfold the treadmill.
BLUE BAG