Filter
Top Products
66
TROUBLESHOOTING YOUR ELLIPTICAL TRAINER
Our Elliptical Trainers are designed to be reliable and easy to use.
If, however, you have a problem, these troubleshooting steps may
indicate the cause.
PROBLEM: The Console does not light up.
SOLUTION: 1) Check to make sure the Elliptical Trainer is turned
on (switch is located near power supply).
2) If you are using the Elliptical Trainer without a power supply, be
sure you are striding fast enough to power the Console. If the
problem persists, plug in the power supply, turn the Elliptical Trainer
on and test to see if the Console powers up.
PROBLEM: The Elliptical Trainer appears to work but there is no
resistance change.
SOLUTION: The magnetic brake assembly is not working
properly; please contact your retailer.
PROBLEM: The Elliptical Trainer makes a squeaking or creaking
noise.
SOLUTION: Check and tighten all the bolts on the Elliptical Trainer
again.
NOTE: If the above steps do not remedy the problem, discontinue
use, turn the power off and contact your retailer.
elliptical trainers
X6600HRC& DA