Filter
Top Products
4
Features and Operation
Main Parts and Controls
A. LED Bulbs
B. Power/Dimmer Touch Sensors
(Dome and Button)
C. DC Socket
D. DC Jack
E. USB Connector
F. USB Cable
B
B
C
D
E
F
A
Lantern Operation
1. The lantern may be operated either by the internal rechargeable battery or
by using the USB cable plugged into a USB power source, e.g., a computer.
2. Before fi rst operation, the lantern should be charged for 6 hours to fully
charge the battery. This will allow up to 4 hours of operation.
3. To charge the lantern, plug the DC jack into the DC socket of the lantern and
plug the USB connector into a computer (computer must be on).
4. The lantern can be operated by touching the power/dimmer touch sensor to
turn on or off.
5. To dim the lantern, touch and hold either touch sensor. Release when the
lantern is dimmed to desired level.
NOTE: The ReadyLight™ is dimmable to help preserve battery power or reduce
light for recreational uses.
NOTE: An optional USB adapter can be purchased for the unit to allow
charging in a 120 VAC wall outlet. For ordering information, go to
www.verilux.com/parts-and-accessories or return the order form on page 5 of
this manual.
NOTE: Due to electrical current limitations of USB (500mA), a USB powered
light may not seem as bright as a battery powered light.
VB05-MAN-Rev6.indd 4VB05-MAN-Rev6.indd 4 9/24/10 10:51 AM9/24/10 10:51 AM