26
Technical Specifi cations
AC power rating 120V~ 60Hz 140W
Auxiliary Lamp Max. load 100W 0.8A
Dimensions 9.75” W x 5.25” D x 5.5” H (24.8 cm x 13.3 cm x 14 cm)
Weight 5.5 lbs
Relative Humidity 75% max
All specifi cations subject to change without notice.
Troubleshooting
Problem
System does not function
No sound
FM reception is weak
The Brightness Control
does not change the
brightness of the LED light
panel or auxiliary lamp
Volume of connected AUX
device is too low
What to do
• Make sure the power cord is fully plugged into an
operating electrical outlet.
• Make sure the Audio Input Selector is not OFF.
• Does the display light?
• Turn the volume up.
• Is the Audio Input Selector set appropriately?
• Does the display show MUTE? If so, press the
Selector Button to unmute.
• Connect the supplied external antenna.
• Make sure that the light you wish to control is
ON: Go to LIGHT SET on the display menu and
check settings.
• Is an auxiliary lamp plugged into the Rise &
Shine
®
and turned on?
• Set Rise & Shine volume. Set volume of AUX
device.
VA04_Man_Rev9.indd 26VA04_Man_Rev9.indd 26 11/4/09 1:38 PM11/4/09 1:38 PM