Filter
Top Products
6
STEP 3:
FIGURE 3
• SECURELY assemble the REAR BENCH SUPPORT (7) to the LOWER BENCH FRAME (5) using two 1/2 X 3-1/4” BOLTS (19), two
1/2” INT TOOTH LOCK WASHERS (23), two 1/2” PLASTIC DOME WASHERS (25) and two 1/2” LOCK NUTS (26) as shown in
FIGURE 3.
• SECURELY assemble the FRONT BENCH SUPPORT (8) to the UPPER BENCH FRAME (1) using two 1/2 X 3-1/4” BOLTS (19), two
1/2” INT TOOTH LOCK WASHERS (23), two 1/2” PLASTIC DOME WASHERS (25) and two 1/2” LOCK NUTS (26) as shown in
FIGURE 3.
1/2 X 3-1/4” 19
8
1
23
5
26
25
7
19 1/2 X 3-1/4”